Why workplace fires start
How heat, fuel and oxygen come together at work, who holds duties for fire risks, and how risk management applies.
Heat, fuel and oxygen at work
A fire needs heat, fuel and oxygen. Oxygen is in the air all around us, so preventing fires at work comes down to controlling heat sources, controlling fuel, and keeping the two apart.
Most workplace fires begin with something ordinary: a damaged lead, a heater too close to paper, sparks from grinding or rubbish piled against a wall. Because the causes are everyday hazards, everyday habits go a long way towards preventing them.
Safe Work Australia groups ignition sources into three broad types: flames, sparks and heat. Fuel is anything that can burn.
- Flames: welding and cutting torches, gas heaters, pilot lights, lighters and matches.
- Sparks: electrical faults, switches and motors, static electricity, and grinding or metal scraping on metal or concrete.
- Heat: hot surfaces such as heaters, ovens, light globes, flues, engines and exhausts, and equipment or batteries that overheat.
- Fuel: paper, cardboard, packaging, pallets, fabric, plastics, dust, and flammable liquids and gases.
Ignition sources can also arrive from outside an area, for example a delivery vehicle's hot engine and exhaust, or a cordless tool someone carries in.
Who has duties
Under the model Work Health and Safety (WHS) laws used in most states and territories, the person conducting a business or undertaking (PCBU) must ensure, so far as is reasonably practicable, the health and safety of workers and of other people affected by the work. That includes a safe work environment and the safe use, handling and storage of substances, so fire risks are part of the PCBU's duty.
Officers, such as company directors, must exercise due diligence to make sure the PCBU meets its duties. Workers, including contractors, must take reasonable care for their own health and safety and that of others, follow reasonable instructions, and cooperate with reasonable safety policies and procedures.
Victoria has its own Occupational Health and Safety laws with similar expectations.
Managing fire risk in four steps
Safe Work Australia's model Code of Practice on managing work health and safety risks sets out four steps. They work for fire hazards just as they do for any other hazard.
- Identify hazardsFind what could start or feed a fire.
- Assess risks, if neededWork out how likely a fire is and how serious it could be.
- Control risksPut in place the most effective controls that are reasonably practicable.
- Review controlsCheck they are working, and review them when something changes.
Many fire hazards have well-known controls, such as keeping heaters clear of anything that can burn. If you already know the hazard and how to control it, the Code says you can go straight to putting the control in place.
The hierarchy of control
The model WHS Regulations rank control measures from most to least effective. Eliminate the risk if you can. If that is not reasonably practicable, minimise it by substituting, isolating or using engineering controls, then administrative controls, then personal protective equipment (PPE).
The Regulations require duty holders to work through this ranking for many risks, including electrical risks, hazardous chemicals and ignition sources in hazardous atmospheres. It is a sound way to tackle any fire hazard, because controls higher up don't depend on people remembering to do the right thing.
- EliminateRemove the hazard, such as disposing of chemicals nobody uses.
- SubstituteUse something less hazardous, such as a water-based product instead of a solvent-based one.
- IsolateSeparate the hazard by distance or barriers, such as a dedicated store for flammable liquids.
- Engineering controlsUse physical controls, such as safety switches or power boards with overload protection.
- Administrative controlsUse procedures, permits, signs and training, such as a hot work permit system.
- PPEProtect the person, such as non-flammable clothing for hot work. It does not reduce the hazard itself.
Key points
- Fire needs heat, fuel and oxygen, so prevention means controlling heat and fuel and keeping them apart.
- Work down the hierarchy of control: eliminate first, and treat procedures and PPE as back-ups.
- This is awareness training. It doesn't replace your workplace's induction, procedures and hands-on training, a recognised qualification, or a fire risk assessment of your workplace.
In the risk management process, which step checks that fire controls are still working after something changes?
Answer the knowledge check correctly to complete this module.
References: Model WHS Act, sections 19, 27 and 28 (duties of PCBUs, officers and workers); Model WHS Regulations, regulations 34 to 38 (managing risks and the hierarchy of control); Safe Work Australia, model Code of Practice: How to manage work health and safety risks; Safe Work Australia, model Code of Practice: Managing risks of hazardous chemicals in the workplace (ignition sources). General information only; always follow your workplace's own procedures.