Workplace fire prevention: stop fires before they start
Learn to spot and control the everyday hazards behind workplace fires, from overloaded power boards and battery chargers to hot work, chemicals and rubbish piled against a wall. Learn and take the assessment free. Pay A$29 for your certificate only after you pass.
- 1 LearnFree6 short modules
- 2 AssessmentFree15 questions, free retries
- 3 CertificateA$29Only if you pass

- Free to learn and assessEvery module and the assessment, with free retries.
- Written for Australian workplacesDrawing on the model WHS laws, Safe Work Australia and Australian Standards.
- Verifiable certificateA unique ID and QR code anyone can check.
- Secure checkoutPayments handled by Stripe. No account needed.
Workplace Fire Prevention Awareness, in plain English.
Most workplace fires start with something ordinary: a damaged lead, a heater too close to paper, sparks from grinding, or rubbish left against a wall. This course shows you how to recognise those hazards and which controls work, drawing on the model WHS laws, Safe Work Australia's Codes of Practice and Australian fire service guidance.
Six short modules cover how fire risk is managed; electrical hazards and battery charging; heaters, kitchens and hot work; flammable liquids, gas cylinders and waste; fire doors, exits and fire safety equipment; and the everyday routines that keep a workplace fire-safe. Hazard-spotting cards and short scenarios let you practise what you would do.
It suits anyone who works in, supervises or runs a workplace, whether that's an office, shop, kitchen, warehouse or workshop. Your own workplace's procedures, induction and training always come first.
Fire Warden Awareness covers prevention in a single overview module and centres on the warden's role in an emergency, while Fire Extinguisher Awareness, Chief Warden Awareness and Emergency Evacuation Awareness deal with what happens once a fire or emergency has started. This course stays before the alarm. It goes deeper into finding fire hazards and controlling them, through electrical safety, heat sources and hot work, storage, housekeeping, building protection and daily routines, and touches on emergency response only where it shapes prevention, such as what to do if a battery starts to smoke.
What you'll learn
- How heat, fuel and oxygen combine at work, and how the hierarchy of control applies to fire risks
- Who holds duties for fire risks under the model WHS laws
- How to spot and control electrical hazards, including power boards and lithium-ion batteries
- When electrical equipment must be inspected and tested, and what a test tag records
- Safe practice for heaters, kitchens, smoking areas and hot work permits
- How to use labels and safety data sheets, and store flammable liquids, gas cylinders and waste
- How to keep fire doors, exits and fire equipment working, and build inspection and shutdown routines
Who it's for
- Workers who want to spot and report fire hazards in their own area
- Supervisors and team leaders who run workplace inspections
- Small business owners and managers responsible for their premises
- Health and safety representatives and committee members
- Fire wardens who want more depth on prevention
6 modules. 40 minutes of lessons.
Written for Australian workplaces, with diagrams, scenarios and a knowledge check in every module. Learn at your own pace and pick up where you left off.
Why workplace fires start
How heat, fuel and oxygen come together at work, who holds duties for fire risks, and how risk management applies.
Electrical fire hazards
Damaged leads, overloaded power boards, inspection and testing, and charging lithium-ion batteries safely.
Heat sources and hot work
Heaters, kitchens, hot work permits and smoking areas: keeping heat away from anything that can burn.
Flammable and combustible materials
Labels and safety data sheets, storing flammable liquids and gas cylinders, and keeping waste and fuel loads down.
Protecting the building
Fire doors, exits, fire safety equipment and security: keeping the building's protection working every day.
Everyday prevention routines
Workplace inspections, reporting hazards, end-of-day shutdown, contractors, consultation and records.
Free to learn. You pay only for the certificate.
Six simple steps from the first lesson to your certificate. The price is shown from the start, and nothing is charged unless you pass and choose to buy it.
- 1Free
Start the course
Open the first module. No account, password or card.
- 2Free · optional
Learn
6 short, illustrated modules, saved as you go. Optional if you already know the basics.
- 3Free
Pass
15 questions, 80% to pass. Retries are free.
- 4Name + email
Enter your details
Your name for the certificate and an email for your copy.
- 5A$29
Pay A$29
One-off, through Stripe's secure checkout. No subscription.
- 6PDF + email
Download
Your PDF certificate with a QR code, also emailed to you.
A certificate anyone can verify.
Pass the assessment and you can buy a certificate of completion for Workplace Fire Prevention Awareness, a one-off A$29. Its QR code and unique ID link to its record on this site.
- Instant PDF downloadPrint-ready A4, issued as soon as your payment is confirmed.
- QR code and unique IDAnyone can confirm it's genuine on our verification page.
- Emailed and recoverableA copy goes to your inbox, and you can recover it at any time.
- Ready for your profileAdd it to LinkedIn in a couple of clicks.
No subscription. Learning stays free.
Good to know.
Who is this course for?
Anyone who wants to prevent fires at work: workers, supervisors, team leaders, small business owners and managers. You don't need any prior safety training. Fire wardens can use it to go further into prevention than the overview in Fire Warden Awareness.
Does it teach what to do if a fire starts?
Only briefly. This course is about stopping fires before they start. For responding to a fire, see Fire Warden Awareness, Fire Extinguisher Awareness and Emergency Evacuation Awareness, and always follow your workplace's emergency procedures.
Will it tell me how often our electrical equipment must be tested and tagged?
It explains when the model WHS Regulations require inspection and testing, what a test record or tag shows, and Safe Work Australia's general guidance on frequency. The right interval depends on the equipment, how and where it is used, and your state's rules, so a competent person should set your schedule.
Does it cover hot work permits?
Yes, in general terms: what hot work is, why it causes fires and the usual steps in a permit system, including preparing the area, a fire watch and checking for smouldering afterwards. Your site's own permit system sets the exact requirements.
Does it apply in Victoria and the other states?
The hazards and controls are the same everywhere. The course refers to the model WHS laws used in most states and territories. Victoria has its own Occupational Health and Safety laws with similar expectations, and building fire safety rules, such as annual maintenance statements, differ between states and territories.
Is the course free?
Yes. All 6 modules and the final assessment are free, with unlimited retries. You only pay A$29 if you pass and choose to buy a certificate of completion.
Can I go straight to the assessment?
Yes. The lessons are recommended but optional. Take the 15-question assessment whenever you're ready: you need 80% (12 out of 15) to pass, and your answers are marked securely on our server.
How do I receive my certificate?
Straight after payment you can download a PDF certificate, and we email you a copy. Each certificate has a unique ID and a QR code that anyone can use to verify it on this site.
Is this a nationally recognised qualification?
No. Fire Safety Academy provides non-accredited awareness training. It is not a nationally recognised qualification or unit of competency, and it is not a risk assessment, fire safety inspection or statement of compliance for any workplace. It does not replace workplace-specific emergency procedures, practical training or evacuation exercises. Check with your employer whether it meets their requirements.
Other fire safety courses.
Be ready when it matters.
Start the free course, or if you already know the basics, go straight to the assessment for your certificate. No account needed: pay A$29 for the certificate only if you pass and want it.
About 50 minutes, at your own pace. Progress is saved on this device.




